OVHA Chat

I got word today that the special tooling I need for the grain mills has arrived. I will be back around the 22nd and will try out these knurling tool inserts as they give the special pattern to the mill rolls.
The next challenge will be the aluminum hoppers - now have a shear and a brake so that should make things easier.
Also have plenty of oxygen, regulators and extension tubes (stainless).

I'll take an oxygen tank and regulator. Will you be at the sept. meeting?

Can I get an oxygen system? Ill be at the sept meeting.

-Aaron

Dutch

Do you have any stones and stainless tubes available? I would like one if you have any.

Can you also tell me more about the temp controller? I am planning on building a keezer. Is this temp controller something I can use for that purpose?



Sent from my iPhone using Tapatalk - now Free

Now that I am a bit forced to ease up [with my broken arm] I have managed to get some 2 micron stones. I really don't think that 2 [vs. 0.5] microns will be a problem since we have PLENTY of oxygen. I should have them at our next meeting.
unfortunately, I will be slowed further in my grain mill adventure.
If anyone needs materials just chime in here and i'll see what I can do.

Great, I would like to have a stone and tube, what will be the amount that I will owe you for them?


Sent from my iPhone using Tapatalk - now Free

Dutch
Do you still have any of the oxygen systems? If you do I would like to buy one from you. Are they still $40? Are you going to be at the November meeting?
Thanks
Brandon


Sent from my iPhone using Tapatalk - now Free

Will you be at the January meeting? I would like to get one of your temperature controllers.

Thanks
Brandon


Sent from my iPhone using Tapatalk

Latest update. I have come across some HP propane regulators rated 500,000 btus. They come with a tank side fitting and no hose.
Club members can have them for $14. I have also some 0.5 micron stones $9.
O2 systems, ss tubes, and storage tubes as well. Fermentation regulators also.

ANYONE IN NEED OF AN OXYGEN REFILL?
IF YOUR OXYGEN BOTTLE IS GETTING LOW [AND YOU GOT IT FROM ME] [and it has a medical style fill valve] let me know and I will fill - perhaps even easier is to swap out bottles as I already have a bunch filled? no charge to club memebers

FOR OVHA MEMBERS
For anyone interested in any parts for an oxygen system - I have a new stock of regulators. Also have stainless extension tubes as well as storage tubes for the stone wands. Also have hoses and stones.
Full bottles of oxygen as well.

How are you sitting on .5 micron stones and stainless tubes for the stones?

Have some but am not sure where they actually are as we are in the middle of our big move? I should be able to get my hands on them by next meeting?

while you're digging around, I discovered I'm out of oxygen today. Don't know if I left the valve open or what but I could use a refill

Dutch, I would like another temp controller if you have one available.