Change font size
It is currently Sat Nov 25, 2017 3:51 am


Post a new topicPost a reply Page 1 of 1   [ 2 posts ]
Author Message
 Post subject: Forced Carbonization
PostPosted: Sun May 28, 2017 7:34 am 
Brewmaster
User avatar

Joined: Wed Jul 11, 2007 7:54 pm
Posts: 1090
Location: Evansville
When I post flavor and desire to carbonate something like Meade I struggle to carbonate properly. I am in the middle of a really good-looking perry with pot sorbate and slightly sweetened with honey. It is in the serving unit at 39 deg and been hit with 20-25 psi CO2. Also have a reconstructed cherry Meade down from about 12-14 ABV to about 7 (sorbate added) being carbonated in the same way. I will bottle both.
How do I know if I am adequately carbonated?

_________________
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?


Top
 Profile  
 
 Post subject: Re: Forced Carbonization
PostPosted: Sun Jun 04, 2017 10:28 am 
Brewmaster
User avatar

Joined: Mon Jun 25, 2007 1:40 pm
Posts: 1374
Location: Near the Zoo
The 3 variables of carbonation are time, temperature, and pressure (there are more I've learned over the years, but makes for a rather lengthy discussion). The only linear calculation in the variables is time. The easiest, and most repeatable thing is to keep the beer at serving temperature and pressure for a couple of weeks. Just like bottle conditioning.
Changing any of the variables changes everything. You can do it quicker with colder temp, agitation, higher pressure. There is no chart that I'm aware of that you can reference to come up with the perfect carbonation level.
I know that's not the answer you want. So here's my guess to start: take a cold cornies with a ball lock fitting. Hook it up to your co2 tank. While hooked up adjust your pressure to 30 psi. Lay cornie on its side while still hooked up and take your foot and roll the cornie with your foot back and forth heel to toe for 15 min. You'll hear the co2 bubbling in rapidly. After 15 min of agitation. Unhook co2 tank let beer rest for 10 min in refrigerator, reduce head pressure to serving pressure. Let rest another 10 min then taste test sample. That got me close if the cornie was really full. If you have more head space, decrease rolling time dramatically. A half full cornie will on take a couple of min.

_________________
You gonna buy one, or be one?
.....I'm gonna be one!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 2 posts ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron


Powered by OVHA